[Elecraft] Wish List

[rich hurd WC3T]

I have thought of 3D printing a “manifold” that would have connectors that
plugged into the side panel of the KX3 and allowed something similar for a
quick disconnect.  Frankly, however, this idea hasn’t gotten past the
stars-in-the-eyes stage and also frankly it wasn’t that hard to use a wye
cord for my MARS ops.

On Thu, Dec 12, 2019 at 20:02 Jim Jones <n9dix at outlook.com> wrote:

> Okay, I'm a 2nd owner of a KX3 and I'm still reading and trying
> To figure out all the commands and menu options. Yikes. Anyway,
> I run a lot of digital, mainly on Mars circuits. What I'm finding
> Is that I have to swap plugs for the mic and speaker each time I
> Have to go to voice and then back again for digital. What would
> Be nice to add to a wish list is to put a 6-pin mini-din connector
> On the KX3. This would have a pin for Mic input, Ground, Key line,
> And a line out audio level fixed level.
>
> This would allow the end user to take his computer/KX3/Signalink
> Out into the field and run digital fairly easy. This is just a
> Wish for something in the future. By the way, great rig.
> 73
> Jim
>
> Jim Jones - N9DIX
> Waverly, TN
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rich at wc3t.us
>
-- 
72,
Rich Hurd / WC3T / DMR: 3142737
Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid:
*FN20is*