[Elecraft] K3 Sideplate for K144XV

[gt-i at gmx.net]

My serial is 3376, second owner. It seems the first owner made some
interesting mods to it. For example, the backplate BNC-hole for the
2m-Antenna is filled with an external fuse for the KPA3. Does not seem
to be the standard...
Thanks for the info, Dick.
73 Gernot DF5RF

Am 12.12.2019 um 21:14 schrieb Dick Dievendorff:
> Wow!  Even my K3 S/N 00018 and it has screw holes on the side for mounting a
> K144XV.
>
> If you don't have a K144XV installed, the screw holes are filled with 6-32
> pan head screws and a nut, so they won't be empty holes...
>
> 73 de Dick, K6KR
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On
> Behalf Of gt-i at gmx.net
> Sent: Thursday, December 12, 2019 11:31
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: [Elecraft] K3 Sideplate for K144XV
>
> Hi,
> I just bought a used K144XV. My K3 side plate does not have the 3 holes for
> the holding screws.
> Does anybody has the layout of these holes available, so at least I could
> drill them by myself? I guess have no other choices.
> Thanks,
> 73 Gernot DF5RF
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to dick at elecraft.com
>
>