[Elecraft] K3 CW Problem

[Bob McGraw K4TAX]

Sounds as though the paddle contacts need cleaning as well as the connector on the rear.  

Bob, K4TAX


Sent from my iPhone

> On Dec 3, 2019, at 11:38 AM, Keith Lamonica <w7dxx at w7dxx.com> wrote:
> 
> Am I just missing a setting.  With my K3 CW is fine up to about 23wpm.  Any higher speed results in just spacing change
> 
> e.g.
> 
> I have n1mm cw working fine ….… keyboard on software sends qrq fine … n1mm sends qrq fine … paddle is stuck at about 20wpm … if I jack up the speed it increases the character speed bust adds a space so speed does not do up and it sounds like crap… anything I can do?
> John k9dx
> 
> -- 
> Keith E. Lamonica
> keith at lamonica.com
> www.w7dxx.com
> C6ADX - - YI9DXX - - Z88Z
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net