[Elecraft] K3s WSJT-x V2.1.2 no vox

[Bob McGraw K4TAX]

Check SPKR level on the computer.  Also check PWR slider on WSJT-X.  

Check Audio tab on WSJT, F2 Menu, Audio tab to see that both Transmit and Tune boxes are checked. This remembers the settings per band. 

73
Bob, K4TAX


Sent from my iPhone

> On Dec 2, 2019, at 11:23 AM, cx7tt at 4email.net wrote:
> 
> Hola,
> 
> Problem with keying the VOX on the K3s with new install. Select "Tune",
> it turns red but xmtr does not key VOX.
> 
> Never had this problem with v 2.0.0. Double checked USB audio codex for
> both speaker and microphone. Parameters checked for Radio tab, K3s,
> using usb from KIO3 to computer, com4 (doublechecked Device manager for
> correct port), VOX tab checked, 38400 and 8-1-none for Data/stop/handshake.
> 
> Line in selected at 30 on K3s along with Vox gain at 30 (same as
> before). K3s mode selected for TX data and Data A menu selected.
> Received and decode FT8 no problem, still no xmit with VOX.
> 
> Do not see where I can go back to v2.0.0 as it no longer appears on
> WSJT-x website.
> 
> Suggestions?
> 73
> Tom
> HP1XT
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net