[Elecraft] AXE1 40m Extension

[Wayne Burdick]

Either would work, especially since you need an ATU to match on 40 and 30 meters anyway.

The ATU requirement is clearly spelled out in the product info -- hope no one missed this :)  Short whips can be very narrow banded.

Wayne
N6KR



> On Aug 28, 2019, at 4:36 PM, MaverickNH <cbjesseeNH at comcast.net> wrote:
> 
> I see note to attach the radials to the transceiver near the antenna jack. If
> using a short coax to mount the antenna on THE Elecraft tripod base, is
> connecting radials to that base preferred or is connecting them to the
> transceiver still advised? I use the Elecraft AX1 radial and a separate
> radial cut for 20m now, connected to the antenna base rather than KX2
> chassis. I'll probably make another 40m radial and mark it to roll for 20m.
> 
> Bret/N4SRN
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com