[Elecraft] K1 Transmit Offset Adjustment

[Don Wilhelm]

Tom,

You can reach the trimmer with the band board and tuner in place.  Just 
put the OFS jumper in place and follow the instructions in your original 
manual.  The newer K1s have a switch on the bottom instead of the OFS pads.

73,
Don W3FPR

On 8/27/2019 6:59 PM, Tom Johnson wrote:
> In order to reset my TX Offset do I need to remove the Antenna Tuner, or can
> I leave it in place and just install a jumper between the OFS pads?