[Elecraft] How much power can a KPA500 handle in bypass?

[Nr4c]

Yeah, the group. We could take a vote. Or just ask Elecraft directly. This seems more of a tech support question to me. 

Sent from my iPhone
...nr4c. bill


> On Aug 21, 2019, at 11:49 PM, Jim Rhodes <jim at rhodesend.net> wrote:
> 
> Well, if you overdrive it in operate mode it just drops out to standby. So
> no problem there (I wouldn't make a habit of it though). As far as 200
> watts in standby I will have to defer to the group.
> 
>> On Wed, Aug 21, 2019 at 10:16 PM Tom <elecraft.list at videotron.ca> wrote:
>> 
>> HI,
>> I am setting up a multi-radio to  one antenna switch and to get the maximum
>> flexibility I would like to pass all of them through a KPA500 / KAT500
>> combination. So several radios connected to a switch, the output of the
>> switch to the input of the KPA500 and from there out to the KAT500.
>> All of the radios are under 100W but one is 200W.  Will this be an issue
>> with the KPA500 in bypass?
>> A related question, what if I accidently put the 200W in in operate?  Just
>> covering all my bases here.
>> Thanks, Tom
>> Va2fsq.com
>> 
>> 
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jimk0xu at gmail.com
>> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com