[Elecraft] [KX2] WSJT-X Split - Rig or Fake It?

[Bob McGraw K4TAX]

I'd suggest using RIG for SPLIT mode. This takes care of any issues of concern 

Bob, K4TAX


Sent from my iPhone

> On Aug 19, 2019, at 5:23 AM, MaverickNH <cbjesseeNH at comcast.net> wrote:
> 
> I'm using a KX2/KXPA100 at 40W on a Win10 laptop with WSJT-X 2.1.0 for FT8.
> Antenna is a G5RV at 40ft with base ATU 150ft away. I've been advised
> elsewhere that "Fake It" is a better choice than "Rig" for Split Mode:  "it
> depends on what filter the radio has. Most are 2.4Khz (300-2700). If so you
> would most likely need to be between around 600 to 2300. It also depends on
> the skirts of the filter on where power will drop off and you can maybe have
> harmonics. If you want to limit your transmit audio to 1500-2000 you may not
> be able to find a clear place to transmit. If you have CAT control then fake
> it automatically will adjust your transmit audio frequency to be in the
> sweet spot of the filter."
> 
> I understand the KX2 filter is DSP Filtering‎: ‎50-4000 Hz, so am not sure
> about using "Fake It" or "Rig" and would appreciate comment. Thanks!
> 
> Bret/N4SRN
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net