[Elecraft] KXPA100 Question

[Brian Hunt]

Just out of curiosity, is the serial speed set to 38400?  Running slower would make a difference. 

73,
Brian, K0DTJ

> On Aug 18, 2019, at 15:41, Grant Youngman <ghyoungman at gmail.com> wrote:
> 
> I fiddled with it a bit, and really didn’t notice any major changes in how the PX3 controls function.  Not that there aren’t any.
> 
> The simple solution is to simply set PA Mode: Off when generally tuning around.
> 
> Grant NQ5T
> KX3 (8342)/KXPA100
> 
> 
>> On Aug 18, 2019, at 5:30 PM, Donald Wines <k5dwdon at gmail.com> wrote:
>> 
>> Grant,
>> 
>> Something else I've noticed since getting the KXPA100 is the Select knob on the PX3 gets flaky if it's turned too fast. It seems to work fine if you turn it slowly. For instance when setting the Ref Level if the Select control is turned very fast the display just jitters and doesn't change the level. But when turned at a very slow rate the level changes appropriately. I didn't notice this behavior before I put the KXPA in line.
>> 
>> You might try that and let me know what happens.
>> 
>> Thanks,
>> Don, K5DW
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to huntinhmb at coastside.net