[Elecraft] KXPA100 Question

[Donald Wines]

Grant,

Something else I've noticed since getting the KXPA100 is the Select knob on
the PX3 gets flaky if it's turned too fast. It seems to work fine if you
turn it slowly. For instance when setting the Ref Level if the Select
control is turned very fast the display just jitters and doesn't change the
level. But when turned at a very slow rate the level changes appropriately.
I didn't notice this behavior before I put the KXPA in line.

You might try that and let me know what happens.

Thanks,
Don, K5DW

On Sun, Aug 18, 2019 at 2:41 PM Grant Youngman <ghyoungman at gmail.com> wrote:

> Don …
>
> Thanks.  That answers my question.  You’re right, it’s close enough if
> you’re tuning slowly, but if you try to tune quickly the PX3 cursor doesn’t
> follow so well.
>
> Grant NQ5T
> KX3 (8342)/KXPA100
>
>
>
>