[Elecraft] KXPA100 Question

[Donald Wines]

Grant,

Don’t know if it’s normal behavior but my setup is exactly like yours and the behavior is the same. Especially noticeable at a high tuning rate. I bought the KXPA100 from an individual but it had never been used, essentially new.

Don, K5DW

Sent from my iPad

> On Aug 18, 2019, at 1:16 PM, Grant Youngman <ghyoungman at gmail.com> wrote:
> 
> Just got a shiny new KXPA100.  
> 
> I’m using “tight” integration with my KX3.  The one downside I’ve observed is that when PA Mode is On, the cursor display on the PX3 gets jerky and doesn’t follow well.  It isn’t terrible, just jerky.  I assume this is the result of the KXPA adding data load through the PX3.
> 
> Can anyone confirm for me if this is normal behavior, or if I should be looking elsewhere?
> 
> Thanks ..
> 
> Grant NQ5T
> KX3 (8342)/KXPA100
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k5dwdon at gmail.com