[Elecraft] K2 RF Gain Control

[Keith]

The first thing you should check is dust on the control variable 
resistor. Using a different variable resistor will give you a quick answer.

73, Keith

KM6WIZ


On 8/15/19 12:49 PM, KD0Q wrote:
> I have a new to me K2 SN in the 1200's that appears to have a flaky RF Gain
> control.  The lightest of touch on the knob triggers what I think is AGC.
> The receiver goes silent for a few seconds, longer with slow AGC.  Is it
> the pot or is there something else I should be looking at?
>
> If I need to replace the RF Gain pot, what other updates should I do while
> I've got the panel off?
>
> Thanks.
>
> 73, Glenn KD0Q
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6jpa at att.net
>