[Elecraft] KX3 ATU Not Tuning

[Nr4c]

25.4:1 = No antenna found. Switch ports if you have the amp or check ALL connections in the antenna circuit. 

What have you “CHANGED”?



Sent from my iPhone
...nr4c. bill


> On Aug 11, 2019, at 5:14 PM, Brian Hunt <huntinhmb at coastside.net> wrote:
> 
> In my experience 25.4:1 denotes an open or possibly shorted antenna connection or a failed SWR measurement circuit. What happens if you bypass the ATU and transmit (or tune) into a known load?  Do you get an expected SWR?
> 
> 73,
> Brian, K0DTJ
> 
>> On Aug 11, 2019, at 12:11, Aaron <k5atg.aaron at gmail.com> wrote:
>> 
>> Any other ideas on the tuner?
>> It is still not tuning, and it just says 25.4:1.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to huntinhmb at coastside.net 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com