[Elecraft] KPA1500 LOW GAIN FAULT

[Bob McGraw K4TAX]

A good approach for those PL-259 connectors outside or exposed to the 
weather.   For those inside, that's a might bit aggressive. I just 
prefer to snug them tight, a bit more than hand tight, using some small 
channel lock pliers.

73

Bob, K4TAX

On 4/30/2019 5:54 PM, Gwen Patton wrote:
> I started using a corrosion-inhibiting lube on my PL-259s, and religiously
> sealing them with Coax-Seal. I tighten them very tightly as well. Since I
> started doing that, I have no odd failures or intermittent connections in
> my feedlines.
>
> 73,
> Gwen, NG3P
>