[Elecraft] K3 - DVR installation question

Bob McGraw K4TAX rmcgraw at blomand.net
Tue Apr 30 10:33:12 EDT 2019


I use AUDACITY which is a free software, record my own messages, set it 
to  play a loop and let it feed the radio.  It can be used for most all 
modes, SSB and CW.     I have several pre-recorded messages which I can 
easily choose.   All that is needed is the free software, and a single 
USB cable between the computer and my K3S. Set the input to MIC + LIN 
and turn on the VOX.  A few level tweaks and one is off and running.

73

Bob, K4TAX


On 4/30/2019 9:17 AM, Dick Dievendorff wrote:
> Bill: I use mine in DX pileups, as I tend to get enthusiastic and holler my call, which could become tedious to my wife. M1 has my call, M2 has “thanks, you’re also 59”.  CW memories for M1 and M2 have similar function.
>
> I tend to use M1 less often and M2 sooner since the arrival of my KPA1500.
>
> Good to meet you in Visalia!
>
> 73 de Dick, K6KR
>
>> On Apr 30, 2019, at 13:58, K8TE <billamader at gmail.com> wrote:
>>
>> In addition to contesting, I use it to call friends for a pre-setup sked.
>> They often don't show-up on-time or can't make it.  I quit after five
>> minutes with no response.
>>
>> During FD several years ago, I took over the 40m station after a nearby
>> lightning strike took out the primary K3.  The back-up had no DVR.  That was
>> the longest four hours of the event (not a contest)!
>>
>> I have also used the DVR for Special Event Station operations when the rates
>> slow down.  I wouldn't be without a DVR in my K3's!
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



More information about the Elecraft mailing list