[Elecraft] K3S Audio buzz on transmit, especially AM

[Nicklas Johnson]

Again, the problem persists with all inputs completely disconnected and the
mic gain set at 0. And running solely on a battery into a dummy load.

   Nick

On Thu, Apr 25, 2019, 10:10 PM Jim Brown <jim at audiosystemsgroup.com> wrote:

> On 4/25/2019 8:15 PM, Nicklas Johnson wrote:
> > Physically touching the case or grabbing the barrel of the front panel
> mic
> > connector actually does cause the buzz to get just a little softer.
>
> I suspect either a bonding problem or a problem with the wiring of the mic.
>
> > I generally use solar/battery power, though my ground is bonded to my
> > utility ground.
>
> I suggest that you carefully study either N0AX's recent ARRL book on
> grounding and bonding, or the slides for talks I've given at Visalia and
> Pacifion.
>
> 73, Jim K9YC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>