[Elecraft] XV144 ATF34143 phemt equivalent

[Chris Reed]

Hi Don,
I had thought about it, but it's a long way to send it and figured i should be able to find something more local.
The Doc's suggested an equivalent which I can get ( I'll get a few just in case), so will give it a go and see if fixes it. It certainly down on sensitivity, my IC7400 is better on 2m at the moment.
Thank you for the quick response, very much appreciated. 
Vy 73
Chris G1rpo

Sent from my iPad

> On 22 Apr 2019, at 03:51, Don Wilhelm <donwilh at embarqmail.com> wrote:
> 
> Chris,
> 
> Have you tried ordering the part from Elecraft?  I am assuming they still have some in stock.  Email to parts at elecraft.com with the part number and description and you should receive a return email with the cost.  That will allow you to use the Quick Order form on the website to order and complete the purchase.
> 
> 73,
> Don W3FPR
> 
>> On 4/21/2019 7:07 PM, Chris Reed wrote:
>> Hi all,
>> The ATF34143 Phemt used on the rx input is discontinued and I just wondered what the suggested replacement would be for this little gremlin. I've Just purchased a second hand XV144 and I'm not getting any variation when I adjust c1 and it looks like the 34143 has already been changed looking at the state of the solder.
>> Any guidance would be much appreciated.
>> ATB
>> Chris
>> G1rpo