[Elecraft] K2 - Bar Graph Erratic

[Don Wilhelm]

Robbie,

It sounds to me like you have an RF Gain Control that is worn.
Sine it has been out of service for a while, you might be able to 
restore it by rotating the RF Gain knob through its rotation 10 to 20 times.

If that does not correct it, then replacing the control is the only option.

73,
Don W3FPR

On 4/21/2019 9:07 PM, Robie Elms wrote:bi
> All,
> 
> My K2 has been out of service for an extended period.  Today, I put it back
> on the air and it appears to function properly, except for the bar graph
> display which is erratic.  When I rotate the rf gain control counter
> clockwise segments begin to illuminate until the 3rd is illuminated.  As i
> continue to turn the control no more bars illuminate until I reach about
> the 9 o'clock position and then the remaining segments turn on.  When I
> turn the control clockwise the segments remain lit until I reach about the
> 2 o'clock position and then they begin turning off.  This is one of several
> patterns I see.  Some times all the segments turn on and stay on and at
> other times, only the two left most ones turn on.  Receiver gain seems to
> change in relation to the RF gain control's position.