[Elecraft] K1 manual revisions

[Don Wilhelm]

Bert,

Multiply the RF Voltages listed for the RF Probe by 2.8 to get the peak 
to peak RF voltages observed with an oscilloscope.

73,
Don W3FPR

On 4/21/2019 9:13 PM, Bert wrote:
> HI Don and Petr,
> 
> Thanks for the offer Petr but Don has already been kind enough to send 
> me the Rev. D, 2000 K1 Manual. Thanks anyway!
> 
> I find it quite difficult sometimes to troubleshoot and follow the 
> schematics. Also doing signal tracing in the receiver and
> transmitter is quite subjective using only an RF probe. It would be 
> better to have some RF values p-p so you could use
> a oscilloscope and at the same time see the signal.
>