[Elecraft] K1 manual revisions

[Petr, OK1RP/M0SIS]

Hi Don and Bert,

as I noticed this evening > troubleshooting nor alignment parts are not same
in the different Rev. of K1 manuals. 

Our sick K1 is also from 2000... RF board Rev. D, 2000 so I am using the
manual Revision D, Dec 1, 2000. 
Unfortunately when I measured the resistances on page 45 (J7, J8 test
points) I found the J7 pin 6 has 5.6kOhms to GND but table on page 45 says
it should be >100k. 
What makes me confusing is that when I opened the later manual Revision F,
January 24, 2002 I found that in the same table on page 45 the value of J7
pin 6 should be 5-7kOhms which souns ok compare to my measured value
5.6kOhms... ?!

Don can you let me know some hints what it could means in that case please?
The rest values are same in both tables and measured values are also
corresponding to it. 

Bert I will send you the proper manual for your K1 (we have same Rev. ) >
Revision D, Dec 1, 2000 by email. 
I got it from Don (many thanks Don!!)

Thanks for help in advance. 

73 Petr



-----
73 - Petr, OK1RP 
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
--
Sent from: http://elecraft.365791.n2.nabble.com/