[Elecraft] K2 VCO Alignment - Low voltage

[Mark Yergin]

I'm getting 0.02 V at R30, not 6V.  Turns on T5 correct and wound per
image.  Reflowed the four solder joints and verified continuity between 1
and 2, 3 and 4. C72 is correct value (label 271) and reflowed.  L30 is the
correct value (large slot), and reflowed.  D21-26 confirmed as correct
values.  C71-74 confirmed as correct values.

Suggestions?

Mark W8EWH