[Elecraft] Recommend a K3s foot switch

[Don Wilhelm]

Gee folks, we can build our own transmitters and amplifiers and 
experiment with them on the air.

Why is it so hard to get an RCA plug, cut off the 1/4 inch phone plug 
and solder on an RCA plug?
Much easier than searching for an adapter.

73,
Don W3FPR

On 4/16/2019 9:05 PM, Michael Gillen via Elecraft wrote:
> Hi guys! I searched around a bit nothing conclusive so thought I’d ask.
> 
> I am needing a foot switch for my K3s which is also connected to my KPA500/KAT500 setup.
> 
> I purchased a Heil FS-3 however it has a 1/4” phono plug on it and the K3s has an RCA jack (like a dummy I did not look at the back of the radio before I bought it).
> 
> So, recommend an adapter or I can take this one back to HRO and get something else?
> 
> Recommendations?
> 
> Thanks,
> Michael
> KK6RWK
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>