[Elecraft] K3 Utility and Win 10

[dgb]

Using the correct port?

On 4/15/2019 5:47 PM, w4sc wrote:
> Using FTDI USB from Elecraft,  FTDI latest drivers, No HUB, Works with win7,  does not work with Win10.
>
> Going back to Win 7.
>
> Ben
>
> Sent from Mail for Windows 10
>
> From: Don Wilhelm
> Sent: Monday, April 15, 2019 4:16 PM
> To: w4sc; Elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 Utility and Win 10
>
> Are you using a USB to serial adapter?  If so, have you downloaded and
> installed the latest drivers for that adapter (if the Elecraft KUSB the
> drivers are from FTDI).  Reboot the computer after installation.
>
> Use a USB port on the computer, not on a hub.
>
> 73,
> Don W3FPR
>
> On 4/15/2019 3:54 PM, w4sc wrote:
>> Having trouble with Win10 and K3 Utility communicating with K3.  Latest K3 utility, and have tried 2 different Win10 machines, all latest updates.  Tried lower/higher speeds, no joy.  Works FB win7.   (tnx again Microsoft!!)  Ideas anyone??
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>