[Elecraft] SWR - does it matter?

[Bob McGraw K4TAX]

And then use the lowest loss feedline one can afford and install.  This minimizes the increased loss due to SWR. 

Bob, K4TAX


Sent from my iPhone

> On Apr 10, 2019, at 11:13 AM, Ignacy <no9e at arrl.net> wrote:
> 
> Assuming that the correct load is 50 Ohms, load with SWR of 1.5:1 could be 33
> Ohm or 75 Ohm. Or something more complex.
> 
> The load of 33 Ohm would cause bigger dissipation and the load of 75 Ohm
> less dissipation but also less power. 
> 
> Three options here. First, spend hrs/days optimizing your antennas. Second,
> use antenna tuner. Third, accept inefficiencies. Personally, I would not
> consider a solid-state amp without a built-in tuner.
> 
> Ignacy, NO9E
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>