[Elecraft] K3: Using a K3 to route antenna signals to external devices...

[Don Wilhelm]

Sverre,

That answer depends ---
If you want to connect the SDR directly to the antenna, put the TEE 
between the ANT OUT and the preamp.
OTOH, if you want to have the preamp in-line for the SDR input, put the 
TEE between the preamp output and the ANT IN connector.

If you chose to use the preamp with the SDR, you may have to do some 
work on the powering and activation of the preamp.

73,
Don W3FPR

On 4/9/2019 6:48 AM, Sverre Holm (LA3ZA) wrote:
> But what if there is a PR6-10 preamp in this path. Where should the
> splitter/TEE-adapter be in that case?
> 
>> In brief, it takes a TEE adapter and 2 short pieces of coax.  Put the
>> adapter between the 2 pieces of coax, and then connect one coax to ANT
>> OUT and the other to ANT IN.
> 
>