[Elecraft] K2

[Don Wilhelm]

I don't believe the KAT2 tuning algorithm has changed since day 1, but 
Wayne might chime in with a verification.
I have never tried to check the KAT2 firmware version "from the 
menus/buttons"  If I needed to check it, I would have been in the middle 
of a repair, and it is easy to separate the two boards to check.
One option that needs the latest version is the K60XV, and support for 
60 meters needs KAT2 version 1.07.
Without the K60XV, version 1.05 will do just fine.

73,
Don W3FPR

On 4/8/2019 3:20 PM, Mark Musick wrote:
> Jim,
> Before you order the FWKAT2, you should check to see what firmware version is currently installed in the KAT2.
> I don't remember how to check the version number. It has been some time since I did that and found I had the latest version.
> If I remember correctly it is version1.07.
> Don probably knows off the top of his head what the current version is and can guide you through the menus to find what version
> Is currently installed in your KAT2.
>
> 73,
> Mark, WB9CIF
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> On Behalf Of Don Wilhelm
> Sent: Monday, April 8, 2019 18:58
> To: James a larkin <sprint63al at comcast.net>; elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K2
>
> Jim,
>
> Certainly, just order and install the latest KAT2 firmware.  FWKAT2 on the website Quick Order form.
>
> 73,
> Don W3FPR
>
> On 4/8/2019 2:40 PM, James a larkin wrote:
>> Is there a way to update my KAT2 to the newest  Algorithm used in the later tuners ?
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>