[Elecraft] Fwd: KPA1500 F/W 2.17 Install Hang

[Gary J Ferdinand]

Never mind.  While the reboot of macOS did nothing, cycling the amp off then on seems to have gotten by the verification hang.  Firmware installed successfully.

73/Gary W2CS



> Begin forwarded message:
> 
> From: Gary J Ferdinand <alaparos at w2cs.net>
> Subject: [Elecraft] KPA1500 F/W 2.17 Install Hang
> Date: April 3, 2019 at 3:40:29 PM EDT
> To: elecraft <elecraft at mailman.qth.net>
> 
> Not my first rodeo, but I must have fouled something up.  I have the 2.17 folder (containing the .hex and .rtf files) in the local folder for the KPA1500 utility.  The utility says it can talk to the amp.  I tell it to download the files.  I get the usual firmware download window, but it hangs on the “Verifying file “kpa1500fw217.hex” message.  The hang has lasted over 20 minutes now before I did a Force Quit.
> 
> Suggestions?
> 
> 73/Gary W2CS
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html