[Elecraft] FLDIGI with K3s

[Gmail]

I was able to turn off logging software mode send so I can use Data A or I could use AFSK with rev. Also it’s possible to change K3 to USB AFSK. it’s not a K3 problem but I thought others might have the issue.  Took me a few hours to sort out It all out.
I might have more info tomorrow.  I need to play with log software rig control config.
Ray

Sent from my iPad

> On Apr 2, 2019, at 20:16, Bill Frantz <frantz at pwpconsult.com> wrote:
> 
> Does using Reverse on the K3 make it easier to use the logging software spots?
> 
> 73 Bill AE6JV
> 
>> On 4/2/19 at 4:11 PM, anyone1545 at gmail.com (Gmail) wrote:
>> 
>> I recommend reading the FLDIGI manual.  It states that USB is used for 
>> digital modes, including RTTY.  The K3 uses USB for Data A and LSB for Data 
>> AFSK. 
>> In my first contest I was having problems getting reliable decoding and not 
>> many responses to my calls. I asked a friend who is an PVRC RTTY expert for 
>> help. He monitored my transmission and determined my signal was reversed. He 
>> said some operators would see that and change mode to answer me. Enabling Rv 
>> (reverse) on the lower FLDIGI control panel solved problem. However my 
>> logging software sends a mode command to radio when I select a spot and 
>> change frequency and it turns off Rv. A better solution is Data A mode which 
>> uses USB. 
>> There may be a way to change the FLDIGI RTTY  default however I have not 
>> found it in the menus. Has anyone found it?
>> Ray
>> W8LYJ 
> ---------------------------------------------------------------------------
> Bill Frantz        | If you want total security, go to prison. There you're
> 408-356-8506       | fed, clothed, given medical care and so on. The only
> www.pwpconsult.com | thing lacking is freedom. - Dwight D. Eisenhower
>