[Elecraft] Setting up FLDIGI on K3s

[Don Wilhelm]

To those having problems with DATA modes, take a look at the article on 
my website www.w3fpr.com.  Scroll the left column to the last article 
and click on it to open the document.

While VOX should reliably put the radio into transmit, you can set 
FLDIGI to use PTT via CAT command - BUT don't use both.

73,
Don W3FPR


On 4/1/2019 7:29 PM, Jay Rutherford wrote:
> I hope someone has solved this, too, as I am having the identical problem with my KX3. Other digital modes like FT8 work FB. I would like to not have to use VOX to key the rig. I suspect that I just haven't found the right combination of trial & error.
> 
> Jay K3BH
> 
> On Mon, Apr 1, 2019, at 18:53, ve3bwp wrote:
>> I am running into the exact same thing. fldigi gets audio and freq from rig
>> no problem. USB codec selected for fldigi output but rig just shows TX light
>> but no power out or ALC indication on rig. Nothing plugged into line in
>> jack. Rig set to TX DATA.  MIC SEL = Line in on rig. Same symptoms with
>> FreeDV and WSJTx...
>>
>> USB audio and rig control fine and PPT works but no rig sound card going
>> out.
>>
>> anyone else find this and solved it?
>>
>> Thanks,
>>
>> Brian ve3bwp
>>
>>
>>
>>
>>
>> --
>> Sent from: http://elecraft.365791.n2.nabble.com/
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>