[Elecraft] Setting up FLDIGI on K3s

[Jay Rutherford]

I hope someone has solved this, too, as I am having the identical problem with my KX3. Other digital modes like FT8 work FB. I would like to not have to use VOX to key the rig. I suspect that I just haven't found the right combination of trial & error.

Jay K3BH

On Mon, Apr 1, 2019, at 18:53, ve3bwp wrote:
> I am running into the exact same thing. fldigi gets audio and freq from rig
> no problem. USB codec selected for fldigi output but rig just shows TX light
> but no power out or ALC indication on rig. Nothing plugged into line in
> jack. Rig set to TX DATA.  MIC SEL = Line in on rig. Same symptoms with
> FreeDV and WSJTx...
> 
> USB audio and rig control fine and PPT works but no rig sound card going
> out. 
> 
> anyone else find this and solved it?
> 
> Thanks,
> 
> Brian ve3bwp
> 
> 
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>