[Elecraft] P3 Turn On

[Martin Sole]

Mine does this. The white screen has gone though by the time my finger 
comes off the K3 power button, replaced with a P3 boot loader message, 
that's also gone very quickly.

Martin, HS0ZED


On 26/09/2018 07:15, Bob McGraw K4TAX wrote:
> Just purchased a NIB P3 for my K3S station.   Love it!
>
> Question - is it normal for it to initially power on with a bright 
> white screen while it loads?  This is very brief, but sure makes a 
> flash.   If normal, then so be it.  It is powered from the DC jack on 
> the K3S.   I always switch the station supply on first and then the 
> radio.  Thus the KAT500 and P3 are powered from the same switched source.
>
> I did update it to the latest firmware as it came to me with older 
> version.
>
> 73
>
> Bob, K4TAX
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hs0zed at gmail.com