[Elecraft] K3 PA3 not working
hawley, charles j jr
c-hawley at illinois.edu
Sat Sep 22 19:36:58 EDT 2018
Occam again...
Chuck Jack
KE9UW
Sent from my iPhone, cjack
> On Sep 22, 2018, at 6:15 PM, Michael Blake via Elecraft <elecraft at mailman.qth.net> wrote:
>
> Is the resettable 2A circuit breaker worth checking first?
>
>
> Mike - K9JRI
>
>
>
>
>
>
>> On Sep 22, 2018, at 7:06 PM, Don Wilhelm <donwilh at embarqmail.com> wrote:
>>
>> Grant,
>>
>> Better than calling sales, email support at elecraft.com and ask for an RSA number.
>> Do not send anything until you have the RSA number and shipping instructions. Shipping without that paperwork will only confuse things in the repair process.
>>
>> 73,
>> Don W3FPR
>>
>>> On 9/22/2018 6:53 PM, Grant Bright W5XB wrote:
>>> Many thanks Don,
>>>
>>> Good to know...the tx does ok at 12 watts, but when you turn the power up
>>> (hear the click), the power drops off to zero, and the swr disappear.
>>>
>>> I have a good Collins wattmeter, that shows the 12 watts fine...but I do
>>> have a dummy load. I'll have one tomorrow and try doing a calibration with
>>> the utility.
>>>
>>> If it is the KPA3, I hope I can pull it and send just it to Elecraft. I'll
>>> call Monday about that.
>>>
>>> Many thanks for your help.
>>>
>>> 73, Grant, W5XB
>>>
>>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k9jri at mac.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to c-hawley at illinois.edu
More information about the Elecraft
mailing list