[Elecraft] K3 PA3 not working

[Don Wilhelm]

Grant,

Better than calling sales, email support at elecraft.com and ask for an RSA 
number.
Do not send anything until you have the RSA number and shipping 
instructions.  Shipping without that paperwork will only confuse things 
in the repair process.

73,
Don W3FPR

On 9/22/2018 6:53 PM, Grant Bright W5XB wrote:
> Many thanks Don,
>
> Good to know...the tx does ok at 12 watts, but when you turn the power up
> (hear the click), the power drops off to zero, and the swr disappear.
>
> I have a good Collins wattmeter, that shows the 12 watts fine...but I do
> have a dummy load. I'll have one tomorrow and try doing a calibration with
> the utility.
>
> If it is the KPA3, I hope I can pull it and send just it to Elecraft. I'll
> call Monday about that.
>
> Many thanks for your help.
>
> 73, Grant, W5XB
>
>