[Elecraft] K3 DSP firmware update 'Missing'

[Dave G3WGN M6O]

Update: on further examination when I 'Copy new files from Elecraft' in the
utility, it responds with '2 files copied' then waits for the download. 
Clearly it must need to copy more than two files for MCU, FPF and DSP. I can
see all the needed files on the Elecraft ftp site, but the utility is not
copying the DSP 2.88 files that are there.
In case my anti-virus/anti-malware software was interfering with the copy
process, I temporarily switched it off.  No difference, still reported 2
files copied, no DSP.
73, David G3WGN M6O


Dave G3WGN M6O wrote
> Hi, hoping the Elecraft brains trust can help.  I'm updating the firmware
> on
> my K3 in preparation for the forthcoming 6Gs DXpedition to VK9X.
> Current DSP firmware is 2.86; when I 'Copy new files from Elecraft' in the
> utility, I get the latest MCU and FPF releases, but both DSP are shown as
> 'Missing' in the Available column.  The Elecraft website shows DSP release
> 2.88 as the latest. How do I get the latest DSP firmware?
> 73 David G3WGN M6O
> 
> 
> 
> 
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft at .qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791 at .nabble





--
Sent from: http://elecraft.365791.n2.nabble.com/