[Elecraft] K2 slug-tuned inductors

[Robert G Strickland]

Don...

Where did you find a ceramic screwdriver?

...robert

On 9/21/2018 21:52, Don Wilhelm wrote:
> Chuck and all,
>
> Those particular inductor cores with the narrow slot are difficult to
> break, and they seldom stick.
>
> Since I adjust them during repairs, I would wear out many tuning tools
> in short time.  I bought a ceramic screwdriver with a 1/8 inch wide
> blade.  I have another with a 5/32 inch wide blade that I use for
> adjusting those new trimmer capacitors in plastic cases.
>
> 73,
> Don W3FPR
>
> On 9/21/2018 5:00 PM, hawley, charles j jr wrote:
>> I would get a new wand or file one down.
>> Some of those things get difficult to turn and the screwdriver breaks
>> the core. Is there anyway to loosen them up before they break?
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rcrgs at verizon.net
>

-- 
Robert G Strickland, PhD ABPH - KE2WY
rcrgs at verizon.net.usa
Syracuse, New York, USA