[Elecraft] K2 slug-tuned inductors

[Bob Nielsen - N7XY]

A metal screwdriver might affect the inductance.  There are several 
inexpensive tuning tools made with a plastic handle and a small thin 
metal blade, for example:

https://www.digikey.com/product-detail/en/bourns-inc/H-90/H90-ND/262571

I used a similar tool when I built my K2.

Bob, N7XY

On 9/21/18 7:41 AM, AE0MM via Elecraft wrote:
> The green plastic tuning tool is too wide to fit in the slot of the narrow slot slug-tuned inductors. Is it safe to use a screwdriver on the small slot 1µH inductors?
>
> Thanks,
> --mark/ae0mm
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n7xy at n7xy.net