[Elecraft] KPA1500 - Static IPv4 address

[Larry (K8UT)]

Yes. You can disable DHCP in the amplifier and assign a static address. 
Your router must be capable (within its address range) of accepting that 
static address without a conflict from another device.

In the KPA1500 configuration utility v1.18.7.9:

Select menu >Configuration >Edit Configuration >Network tab
On the network tab, disable (uncheck) DHCP
Manually enter the address you want the amplifier to use
Press <Apply >OK.

-larry (K8UT)

------ Original Message ------
From: "Burl Borcherding" <bborch at gmail.com>
To: elecraft at mailman.qth.net
Sent: 2018-09-19 08:46:08
Subject: [Elecraft] KPA1500 - Static IPv4 address

>Is it possible to set a static IP address on this amp?  I am thinking 
>using one of my static IPv4 address and port 1500.  This would 
>eliminate the local /server computer.
>Or is there a better method of using remote K3, KPA1500 and RemoteRig?  
>I want to be able to use the KPA1500 app to monitor the amp.
>
>Burl,  AJ9Q
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k8ut at charter.net