[Elecraft] K3/RemoteRig Serial Question

[Mitch Wolfson DJ0QN / K7DX]

Mike,

The answer is found on pages 13 and 18 of the RemoteRig manual......NO.

Just a tip; I suggest posing RemoteRig specific questions on their forum.

73,
Mitch DJ0QN / K7DX

-- 
Mitch Wolfson  K7DX / DJ0QN
10285 Boca Cir, Naples, FL 34109
Skype: mitchwo
USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171
Germany: Home:+49 89 32152700 - Mobile/WhatsApp:+49 172 8374436

On 16.09.2018 18:11, Fred Jensen wrote:
> I don't see an answer for you Mike ... are you talking about the 
> "RRC1258 COM2" virtual port that shows up when the USB is plugged in 
> that can be used for controlling other equipment [e.g. antenna 
> switches]?  If so, I believe the 1258 replicates a complete RS-232 set 
> of signals from control end to the radio end.  I'm not sure if it's 
> 2-way however [i.e. bring status data back to the control end].  There 
> is at least one config setting to make it work.
>
> 73,
>
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
>
> On 9/16/2018 8:10 AM, Mike Murray wrote:
>> I've looked thru all of my manuals and still have a question 
>> regarding the
>> serial port on the remote site connection.  Does it use the same basic
>> connections as the K3 (pins 2,3, &5) or does it also utilize RTS and DTR
>> (pins 4 & 7)?  I would like to set up a remotely operated switch for the
>> serial connections as a backup, but want to be certain I get everything
>> that's needed.
>>
>> 73,
>> Mike - W0AG
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dj0qn at arrl.net