[Elecraft] USB sound card recommendation for KX3

[Don Wilhelm]

Once you have selected your soundcard and get ready to set the audio 
levels, you may want to refer to the article on my website 
www.w3fpr.com.  Scroll to the last article on the left column and click 
the link.

You must set the KX3 (or K3 or K3S or KX2) for 4 bars solid on the ALC 
display with the 5th bar flashing.  Most internet advice does not work 
for Elecraft radios.

73,
Don W3FPR

On 9/14/2018 10:54 AM, Walter Underwood wrote:
> On Sep 14, 2018, at 6:08 AM, rick jones via Elecraft <elecraft at mailman.qth.net> wrote:
>>
>> I'm looking for a USB sound "dongle" that will interface with my KX3 for FT8 and similar modes. I have a SignalLink but I'm looking for a more portable solution. Can someone recommend a current make/model that works well? Thank you.
> 
> This page evaluates a bunch of USB audio interfaces for spectrum display, a similar problem.
> 
> http://www.telepostinc.com/soundcards.html
> 
> This page talks about experience with a few specific ones and how to set levels.
> 
> http://audiosystemsgroup.com/USB_Interfaces.pdf
> 
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donwilh at embarqmail.com
> 

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus