[Elecraft] K3: Menu entries in K3 macros

[Wayne Burdick]

Hi Fred,

Use the MN command select the menu entry number. This simulates going into the menu at the radio. The Programmer's Reference provides a table of MN values for each transceiver--be sure to use the one for the K3/K3S.

Then use the MP command to read or change the value. This is also explained in the reference. You can send "MP;" to read the current value to make sure you know how the MP values relate to the menu entry's displayed parameter.

Finally, send "MN255;" to exit the menu.

Wayne
N6KR




> On Sep 6, 2018, at 11:28 AM, Fred Jensen <k6dgw at foothill.net> wrote:
> 
> Technical difficulty in my mind:  How do I change a menu setting from one of the 16 K3 macro slots. Specifically, I want to toggle SPKR+PH on/off using my KPOD in Macro #16.  My K3 has TECH MD set to ON all the time.  I don't fully understand the K3 Programmer's Reference for the MN command I guess.
> 
> 73,
> 
> Fred ["Skip"] K6DGW
> Sparks NV DM09dn
> Washoe County
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com