[Elecraft] Adding mini-banana jack counterpoise point to a KX3?

[rich hurd WC3T]

I have a little pigtail with a PowerPole connector on it. Folds nicely out
of the way.

On Sat, Oct 27, 2018 at 19:04 Don Wilhelm <donwilh at embarqmail.com> wrote:

> Ken,
>
> I don't know about mounting a mini-banana jack, but you could look at
> the left end of the heatsink (heatsink facing you) for a good grounding
> point other than the thumbscrews.
>
> Installing a mini-banana jack would involve drilling holes in the case.
> There is not a lot of free space to do that.  Pick your mounting
> location carefully before drilling to be sure it will not interfere with
> anything in the KX3.
>
> 73,
> Don W3FPR
>
> On 10/27/2018 6:17 PM, Ken Ford - W9LSL wrote:
> > One of the things I really like about the KX2 is the hole for a
> mini-banana
> > jack counterpoise connection.  Is there any place that could be added on
> a
> > KX3?  The case thumbscrews get cranky at times.
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rich at wc3t.us
>
-- 
72,
Rich Hurd / WC3T / DMR: 3142737
Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid:
*FN20is*