[Elecraft] P3: Span limits move when changing bands

[Bill Frantz]

It happens with two different OSs and two different programs. 
The best place to look first is the common elements.

73 Bill AE6JV

On 10/26/18 at 5:00 PM, ghyoungman at gmail.com (Grant Youngman) wrote:

>Why do you presume it is a fault of the P3 and not something 
>funky happening with whatever software you’re running on your PC?
>
>Grant NQ5T
>K3 #2091 KX3 #8342
>
>>On Oct 26, 2018, at 7:46 PM, Bill Frantz <frantz at pwpconsult.com> wrote:
>>
>>I have the same problem with wsjt-x running from a Mac. When I change bands, the center frequency
>changes. Very annoying since it moves part of the display outside of the 17M and 12M bands.
>>
>>73 Bill AE6JV
>>
>>On 10/26/18 at 2:47 PM, k6dgw at foothill.net (Fred Jensen) wrote:
>>
>>> I think that may be a clue Ed, my K3 is ancient [#642] but has current FW and new synth.  The
>computer connects to it and the P3 connects to the K3 serial 
>port ... otherwise fixed-tune mode wouldn't work.  I've never 
>seen the issue when changing bands with the BAND U/D switch, or 
>from macros executed from the KPOD, only when the commands 
>start at the computer and go thru the P3 to the K3.  N1MM+ is 
>the only control software I use.
>>
>>-----------------------------------------------------------------------
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to frantz at pwpconsult.com
>
---------------------------------------------------------------------------
Bill Frantz        | If you want total security, go to prison. 
There you're
408-356-8506       | fed, clothed, given medical care and so on. 
The only
www.pwpconsult.com | thing lacking is freedom. - Dwight D. Eisenhower