[Elecraft] KPA1500 Status Displayed on K3

[Roger D Johnson]

The display of the K3 is "hard coded". When it was designed, there was no
KPA1500 hence it can only read KPA500.

73, Roger


On 10/26/2018 8:13 AM, Ed G wrote:
> I can’t think of a lower priority issue to have….so here is my question.  I have the KPA1500 and K3 cabled together. Why do status changes on the amp (for example when I switch the amp to standby) show on the K3 screen as “KPA500” and not “KPA1500?”  It looks like there is room on the K3 display for the missing digit, but maybe there is a display limitation? Amp firmware rev is 1.64.
> --Ed—
> 
> 
> Sent from Mail for Windows 10
> 
> 
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n1rj at roadrunner.com
>