[Elecraft] K2 driving KPA500 / KAT500 - one small error in prior post
Michael Blake
k9jri at mac.com
Sun Oct 21 16:08:28 EDT 2018
Dave, while not a K2 I do drive my KPA500 with my KX3 and get about 350 watts output on 80 & 40. I have not used the KPA500 with the KX3 on the higher bands.
The KX3 has 15 watts output.
Michael Blake
k9jri at mac.com <mailto:k9jri at icloud.com>
> On Oct 21, 2018, at 3:50 PM, Dauer, Edward <edauer at law.du.edu> wrote:
>
> Check that -- one small error in prior post. The Twins configuration includes the KPA100, not the 500. Can't type. Or can't think. One or the other.
>
> Ted, KN1CBR
>
> On 10/21/18, 1:42 PM, "Dauer, Edward" <edauer at law.du.edu> wrote:
>
> Having used the KPA1500 long enough to be confident that mine has no obvious bugs, I am trying to decide whether to keep my KPA500 / KAT500 or put it up for sale.
>
> One possibility would be to use the 500s with a K2. I have a K2 with the integral KPA100, and two without. The K2/100 has an RCA jack for the amp keying line which should make things easy - just connect one end to the KPA100 and the other to the KPA500, yes?
>
> Using a K2 alone as driver for the KPA500 is the question. There must be an amplifier keying line somewhere in the K2 circuitry, since it can key a KPA500 [should have read KPA100] in the two-box "twins" configuration; but there is no mechanical output for it. Anyone done this who can help with ideas?
>
> What kind of output from the KPA500 is possible with a barefoot K2 driving it? Anything else I should know before trying this out?
>
> The band data is not a problem in either case, since the KPA500 has a one-dit sensing circuit which will be adequate. (It also has band selection buttons, of course.)
>
> Tnx, as always, for any advice,
>
> Ted, KN1CBR
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9jri at mac.com
More information about the Elecraft
mailing list