[Elecraft] K3 vs. KX3 with wsjt-x

[Robert Albano]

I have the same behavior:
KX3
PX3
SignaLink
MacBook Pro
CAT interface

> On 2018 Oct, 20, at 2:21 PM, Bill Frantz <frantz at pwpconsult.com> wrote:
> 
> I have noticed an significant difference between the way my K3 and KX3 work with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission on the radio. With the KX3, the radio remains in transmit mode, although the computer has stopped sending audio. I have to press the "XMIT" button on the radio to get it back to receive mode. It is as if the CAT command to take the radio out of transmit mode isn't being sent or is not being processed by the radio.
> 
> Not that on both radios other actions which use the CAT interface, like changing bands from the wsjt-x UI, work correctly.
> 
> The K3 has been upgraded to the internal sound card/RS232 interface from the K3S.
> 
> The KX3 is being used with a USB <--> RS232 cable and a home brew audio interface using a mini-dongle USB sound "card".
> 
> The computer in both cases is a MacBook Pro.
> 
> Has anyone else experienced this issue?
> 
> 73 Bill AE6JV
> 
> -------------------------------------------------------------------------------------
> Bill Frantz        | Government is not reason, it is not eloquence, it is force; like
> 408-356-8506       | a fire, a troublesome servant and a fearful master. Never for a
> www.pwpconsult.com | moment should it be left to irresponsible action. Geo Washington
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rna at mosslight.com