[Elecraft] KPA-1500 failure

[ROBERT MUELLER]

I have the same problem. I thought it was in the software I am using (HRD, FT8, JTAlerX). Perhaps not.
I have to but in 100 watts from the K3S to get about 900 watts out.

> On October 16, 2018 at 10:35 PM Paul Baldock <paul at paulbaldock.com mailto:paul at paulbaldock.com > wrote:
> 
> 
>     A friend of mine's KPA-1500 has just failed. It behaves like half the
>     PA has died, with max output power about 900W, and requiring
>     excessive drive to get that. He has calls in to service but no
>     response yet. Has anybody experienced such a failure?
> 
>     Thanks
>         * Paul KW7Y
> 
> 
>     ______________________________________________________________
>     Elecraft mailing list
>     Home: http://mailman.qth.net/mailman/listinfo/elecraft
>     Help: http://mailman.qth.net/mmfaq.htm
>     Post: mailto:Elecraft at mailman.qth.net mailto:Elecraft at mailman.qth.net
> 
>     This list hosted by: http://www.qsl.net
>     Please help support this email list: http://www.qsl.net/donate.html
>     Message delivered to k8rgm at comcast.net mailto:k8rgm at comcast.net
>