[Elecraft] Confessions of grounding

[Drew AF2Z]

Yes, it is a hassle getting a stiff copper wire on that little ground 
screw. I use 1" braid with a strip of copper sheet folded and soldered 
over the end and a screw hole drilled through-- basically, homemade flat 
terminal lugs on the ends of the braid. Very easy to manage now.

73,
Drew
AF2Z



On 10/12/18 12:47, Leroy Buller wrote:
> Ok, I just rebuilt my station and wonder how many of you actually ground
> your K3 or your rig?  I have the amp and tuner grounded, but I find
> grounding the K3 somewhat difficult.  Why?  Getting my fat ham fingers to
> the rear if the rig and tighting up the knurled knob with stiff wire is
> quite infuriating.  All the connecting cables are in the way and it just
> trips my trigger.  Then being able to reach over all the doodads and
> geegaws to attach ground is a frustration of mine.  Many years ago it was
> good practice to use solid wire but now i see others using braid.  Stiff
> wire adds to my frustration.   So, for my mental health I would like some
> suggestions or ideas how best to deal with this.  I know...suck it up.
> There has got to be a better way.
> 
> Lee K0WA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pubx1 at af2z.net
>