[Elecraft] Winlink Express + K3S

[Brian Hunt]

When calling to connect with winmor you will always get the timeout 
message until the called station responds.  Once it connects the error 
message should go away.  It drove me nuts for a while. :-) FWIW, I use 
the CAT command option for PTT so I don't have to remember to set the 
PTT-KEY menu.  Seems to work fine.  Note:  K3 and external USB sound 
card used here with Win10 desktop PC.  HTH

73,
Brian, K0DTJ

On 10/10/2018 22:42, Nicklas Johnson wrote:
> Somewhat related to my other post, but sufficiently different that I
> figured it should be its own thread: I consistently get the "Timeout in T>R
> Latency Measurement" message from Winlink Express using the built-in
> software Winmor TNC.
>
> After some poking around and trying different things, I set up the K3S to
> do PTT on RTS, made sure the TX delay was as short as possible, configured
> Winlink to use RTS for PTT, and as far as I can tell, the switching is very
> fast... but Winlink is still not happy about it.  I tried VOX as well, but
> it seemed like latency should be less with RTS for PTT.
>
> I used to get the Timeout error on my KX3 on the first transmit, but
> subsequent transmissions always worked fine.
>
> Has anyone had more success with Winlink with the K3s and with avoiding
> this Timeout message?
>
>     Nick
>