[Elecraft] CODEC

[Bob McGraw K4TAX]

Thank you Don.  Over and over again, I've said "what did you do last, 
before you broke it?"   Well then, go undo that.

73

Bob, K4TAX


On 10/4/2018 5:03 PM, Don Wilhelm wrote:
> Mike,
>
> It is not unusual at all for things to "get jumpy" when the computer 
> is busy doing some frequent task.
>
> Why do we always blame the radio first.  In this day of digital stuff 
> with a computer involved, 90% of the time the problem is with the 
> computer or the settings in your application.
>
> 73,
> Don W3FPR
>
> On 10/4/2018 5:32 PM, Mike Greenway wrote:
>> As previously posted the problem had nothing to do with CODEC or the 
>> K3S.  Problem turned out to be the time update of the computer by 
>> Dimension 4.  I had it set for updates every 1 sec as I didn’t think 
>> that was a problem.  I now have it set for 30 Mins and probably and 
>> hour would not hurt anything as every 15 secs it does about .049 
>> correction on my computer.  I don’t think it is abnormal for the 
>> Rates on WSJT-10 to jump out of range when a time update is done to 
>> the computer.  Something you cant see on WSJT-X or JTDX.  Thanks to 
>> all that wrote with suggestions, all of them good.  73 Mike K4PI
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net