[Elecraft] CODEC UPDATE & CLOSE

[Mike Greenway]

Well the good news is that the K3S has nothing to do with my Rate In/Out 
numbers jumping out of range.  The reason I say that is I was watching 
the WSJT-10 program with the K3S powered off and the were still jumping 
out of range.  When seeing that I decided to check the analog audio 
again and couldnt believe it is jumping also.  Something has gone off 
the rails in the computer arena.

I disconnected everything from the machine today and found that anytime 
I have the Ethernet cable to the computer from the Xfinity router/modem  
connected the Rates start jumping  randomly and sometimes out of range.  
I changed the ethernet cable but not help.  Just for drill I put some 
torrids on each end with no change.    I am thinking of seeing if 
Xfinity will swap out the router/modem.  The numbers do not necessarily 
jump when there is traffic on the ethernet rx or tx so not sure how that 
is causing the audio Rates to jump.   I have no other clues right now 
but guess this case can be closed on the Elecraft reflector as this has 
nothing to do with the K3S.    Thanks to all those that emailed me..  73 
Mike K4PI